 |
|
|
|
Tie Rod Mount
|
(25 to 200mm)
|
|
|
|
|
 |
|
Side Lug Mount
|
(25 to 200mm)
|
|
|
|
|
Pin Mount
|
(25 to 200mm)
|
|
|
|
|
|
|
Trunnion Mount
|
(25 to 200mm)
|
|
|
|
|
|
|
Solid Flange Mount
|
(25 to 200mm)
|
|
|
|
|
|
Double Rod End
|
(25 to 200mm)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PARTNERS LOG-IN
|
|
|
|
|
|
|
|
Series MH – Metric Hydraulic Cylinders
TRUNNION CYLINDERS
Model MH74 – ISO Style MT4
Center Trunnion Mount
25mm to 200mm Bores
|
 |
|
|
Table 1MH The dimensions given on this table are affected by the piston rod diameter and stroke. Bore
Ø | Rod
MM | Cylinder
Code # | B | LB | P | V | W | XG | XJ | Y | ZB | 25 | 12 | MH0151 | 24 | 99 | 53 | 6 | 15 | 44 | 101 | 50 | 121 | 18 *** | MH0152 | 30 | 32 | 14 | MH1510 | 26 | 103 | 56 | 12 | 25 | 54 | 115 | 60 | 137 | 22** | MH1511 | 34 | 40 | 18 | MH1520 | 30 | 128 | 73 | 6 | 25 | 57 | 134 | 62 | 163 | 28** | MH1521 | 42 | 12 | 50 | 22 | MH1530 | 34 | 134 | 74 | 6 | 25 | 64 | 140 | 67 | 174 | 28 | MH1531 | 42 | 6 | 36** | MH1532 | 50 | 9 | 63 | 28 | MH1540 | 42 | 136 | 80 | 6 | 32 | 70 | 149 | 71 | 183 | 36 | MH1541 | 50 | 9 | 45 | MH1542 | 60 | 13 | 80 | 36 | MH1550 | 50 | 159 | 93 | 5 | 31 | 76 | 168 | 77 | 209 | 45 | MH1551 | 60 | 9 | 56 | MH1552 | 72 | 9 | 100 | 45 | MH1560 | 60 | 168 | 101 | 7 | 35 | * | * | 82 | 222 | 56 | MH1561 | 72 | 7 | 70 | MH1562 | 88 | 10 | 125 | 56 | MH1570 | 72 | 197 | 117 | 7 | 35 | * | * | 86 | 258 | 70 | MH1571 | 88 | 10 | 90 | MH1572 | 108 | 10 | 160 | 70* | MH1580 | 88 | 213 | 130 | 7 | 32 | * | * | 86 | - | 90* | MH1581 | 108 | 110* | MH1582 | 133 | 200 | 90 | MH1590 | 108 | 267 | 165 | 7 | 32 | * | * | 98 | - | 110* | MH1591 | 133 | 140* | MH1592 | 163 |
# For double rod end cylinders, add prefix letter D to cylinder code. Example: DMH0151. Double rod ends are not available on clevis mount Series MH cylinders.
*** Cushions not available on rod end.
** Available with fixed nonadjustable cushions on rod end and standard adjustable cushions on the blind end only.
* Consult factory for these dimensions. |
Table 2MH These dimensions are constant regardless of rod diameter or stroke. Bore
Ø | BT | E | EE
BSPP | F | G | J | K | TD
f8 | TC
h14 | TL | TM
h14 | TK | UH | UM | UT | 25 | 9 | 40 | 1/4 | 10 | 40 | 25 | 7 | 12 | 38 | 10 | 48 | 20 | 45 | 68 | 58 | 32 | 11 | 45 | 1/4 | 10 | 40 | 25 | 9 | 16 | 44 | 12 | 55 | 25 | 54 | 79 | 68 | 40 | 14.5 | 63 | 3/8 | 10 | 45 | 38 | 10 | 20 | 63 | 16 | 76 | 30 | 76 | 108 | 95 | 50 | 17 | 75 | 1/2 | 16 | 45 | 38 | 15 | 25 | 76 | 20 | 89 | 40 | 89 | 129 | 116 | 63 | 17.5 | 90 | 1/2 | 16 | 45 | 38 | 15 | 32 | 89 | 25 | 100 | 40 | 95 | 150 | 139 | 80 | 22 | 115 | 3/4 | 20 | 50 | 45 | 19 | 40 | 114 | 32 | 127 | 50 | 127 | 191 | 178 | 100 | 25 | 130 | 3/4 | 22 | 50 | 45 | 19 | 50 | 127 | 40 | 140 | 60 | 140 | 220 | 207 | 125 | 31.5 | 165 | 1 | 22 | 58 | 58 | 26 | 63 | 165 | 50 | 178 | 73 | 178 | 278 | 265 | 160 | 36.5 | 205 | 1 | 25 | 58 | 58 | 28 | 80 | 203 | 63 | 215 | 90 | 216 | 341 | 329 | 200 | 57 | 245 | 1 1/4 | 25 | 76 | 76 | 31 | 100 | 241 | 80 | 279 | 110 | 280 | 439 | 401 |
|
